Important news about the Der OTO release date !

[Bongsau]

So.....close...........now......


Octatrack is all primed and ready to go.

[Bongsau]

Here we go.......it's there!

[jordanstoner]

Got it! Hooray!
Update worked flawlessly - now to play!

[Tim]

Whoohooo...

[jordanstoner]

Okay, first test - I cannot go back to Biscuit mode. If I hold "Brain/SEQ" and steps 4 and 5 while powering on, the unit either goes into DER OTO mode or into a mode where the "Brain/SEQ" is blue and the Filter is green, and nothing can be pressed or changed. Holding down the same buttons again during boot will return to DER OTO. When the unit turns on, the Filter led flashes yellow for a moment, regardless of what "mode" it would be switching to.

Attempting to reload firmware now...

[jordanstoner]

Still not working for me. I'm moving this to the Troubleshooting forum so as not to derail this thread:
viewtopic.php?f=4&t=112

[UltraJove]

Edit : unbricked

ok me too, i have problem. I go to the troubleShooting part .
I hope to fix that cause my biscuit in a brick

[PPIGEARD]

You did it !
Version OK, Der OTO a vraiment un son !

Bravo OTOman !

P.

[Bridge]

yay!

[otomachines]

Hi to all,

In my haste, I forgot to remove a test line in my spaghetti code !
With this release, you can use your biscuit only in Der OTO mode.
You can go back to Biscuit rev 1.2 by installing the firmware rev 1.2 in the archive folder.

I removed the firmware and I'll try to send you the right one as soon as possible.

I'm very busy shooting the video at the moment, I will try to go back to my workshop tonight to fix that.

I'm really sorry for the inconvenience.
These last days were a real mess for me !

All the best,

Denis