HOME › Forums › BIM-BAM-BOUM › BAM Chorus Freeze sound shift/vibration

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 28 February 2018 at 21 h 04 min #1217
    clickclack777
    Participant

    I´m getting a slight change/jump in sound with BAM in Chorus mode when activating Freeze that I´m not getting with the other modes. Does it have to do with the modulation of the delay to achieve the chorus effect? I´ve tried it in all kinds of settings. It is most noticeable with a bit of damping.

    10 sec in on in this clip
    Click here for sound example

    3 March 2018 at 13 h 48 min #1227
    Anonymous
    Inactive

    Same problem here. Unfortunately Chorus is my go-to-mode. Freeze function is not really usable there. I hope this will be ironed out with the coming update.

    6 November 2018 at 23 h 34 min #1578
    Anonymous
    Inactive

    Hey, just bumping this because I verified that the issue is still occurring with the newest firmware. Would love for this to be fixed!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.