Forum Replies Created

Viewing 6 posts - 31 through 36 (of 36 total)
  • Author
    Posts
  • in reply to: When can i pre-order BAM? #419
    Oto Machines
    Oto Machines
    Keymaster

    Hi,
    We were so busy these last weeks with the last batch of Biscuit and the new batch of BIMs that we are a little late on BAM!
    The prototypes are finished, we are now starting the industrial process, and buying the components for the first production batch.
    We will post more infos as soon as the pre-orders are open, maybe in a month.
    There’s a chorus inside BAM. It’s more a random modulator to thicken the reverb tails than a standard LFO.
    You can only set its depth. One of the reverb is a chorus with a tail, but you cannot change the waveform and the speed.
    The BAM product page should be online in the next weeks, with more infos (specs, audio demos,…).

    in reply to: New batch on the way? #418
    Oto Machines
    Oto Machines
    Keymaster

    Hi,
    We had a lot of work with Biscuit at the end of the year because one of our sub-contractor was late.
    We do our best to make up for lost time. Most of the 150 pre-ordered Biscuits are already delivered or on their way!

    in reply to: Question on Biscuit Naked #417
    Oto Machines
    Oto Machines
    Keymaster

    Hi,
    When the Naked is set to its maximum position, the volume should be exactly the same as the bypassed signal.
    Please do the following test to check if your Biscuit is ok :

    – Switch the BYPASS on and send a signal to Biscuit
    – Turn the DRIVE pot up until you see the BYPASS switch lit from green to orange quite often
    – Turn the DRESSED pot to its minimum position and NAKED to max
    – Check if you still have volume drops between Bypass and not

    Please let me know if it works.

    in reply to: Any firmware plans? #416
    Oto Machines
    Oto Machines
    Keymaster

    Hi,
    There’s no plans for an upgrade for Biscuit at the moment.
    The last one (Der OTO) was a quite huge one!
    Some bugs fixes and new features are planned later this year, but it will need two separate firmwares: one for Biscuit and one for Der OTO.
    The reason is that there’s no more room for bug fixes or new features in the same firmware (as it’s the case now).

    in reply to: New batch on the way? #382
    Oto Machines
    Oto Machines
    Keymaster

    Yes, we have enough stock to build a last batch 200 Biscuits in december!
    These units will be available for sale in december via our online store.
    We also have a waiting list if you want to be sure to get one of these.
    Just let me know.
    Denis

    in reply to: Where did the biscuit go? #381
    Oto Machines
    Oto Machines
    Keymaster

    Biscuit is out of stock since more than 6 months now. Some components are obsoletes and hard to find.
    We’ve managed to buy some stock and will build a last batch of 200 Biscuits this winter.
    These Biscuits will be available for sale on our online store in december maybe.
    If you want to be sure to get one, we have a waiting list.
    Please let me know if you want to be part of it and we’ll put a Biscuit aside for you.
    Denis

Viewing 6 posts - 31 through 36 (of 36 total)