Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: Question about new Bim Thru mode #1303

    garrett
    Participant

    ah that makes a lot of sense. thanks for your reply!

    in reply to: Ideas for BIM firmware upgrade #1273

    garrett
    Participant

    any updates on the release?

    in reply to: Ideas for BIM firmware upgrade #1253

    garrett
    Participant

    That makes sense, thanks for the reply. Can’t wait for the update!

    in reply to: Ideas for BIM firmware upgrade #1250

    garrett
    Participant

    I’m not sure if this could be possible to implement or not. Right now when you input audio that is panned left or right, the delay is made to that according side it is panned to. It would be cool to have an option so that when a panned signal is passed through, the delay would be inverted. Making the panned dry signal and the delay on opposite ends of the stereo spectrum.

    I first heard this on the sequential prophet-6. When the pan spread is turned up, the delay is panned on the opposite side. Creates a larger more lush stereo signal.

    in reply to: Ideas for BIM firmware upgrade #1203

    garrett
    Participant

    Can’t wait to try this out! So excited for the thru mode

Viewing 5 posts - 1 through 5 (of 5 total)