Oto Machines » All Posts https://www.otomachines.com/forums/forum/bim-bam-boum/feed/ Mon, 20 Apr 2026 07:38:49 +0000 https://bbpress.org/?v=2.6.9 en-US https://www.otomachines.com/forums/topic/line-level/#post-85490 <![CDATA[Line Level?]]> https://www.otomachines.com/forums/topic/line-level/#post-85490 Wed, 05 Jul 2023 23:30:42 +0000 Carson Childers Does the BAM and other pedals accept line level signals straight from a patch bay or do they require being stepped down with a reamp box?

]]> https://www.otomachines.com/forums/topic/line-level/#post-85489 <![CDATA[Line Level?]]> https://www.otomachines.com/forums/topic/line-level/#post-85489 Wed, 05 Jul 2023 23:30:42 +0000 Carson Childers Does the BAM and other pedals accept line level signals straight from a patch bay or do they require being stepped down with a reamp box?

]]> https://www.otomachines.com/forums/topic/noise-when-press-active-button/#post-85422 <![CDATA[Reply To: Noise when press active button]]> https://www.otomachines.com/forums/topic/noise-when-press-active-button/#post-85422 Fri, 24 Mar 2023 12:11:46 +0000 Thomas Got it.
I still have Midi Cc control on Mix so I’m all good.

Cheers

]]> https://www.otomachines.com/forums/topic/noise-when-press-active-button/#post-85421 <![CDATA[Reply To: Noise when press active button]]> https://www.otomachines.com/forums/topic/noise-when-press-active-button/#post-85421 Fri, 24 Mar 2023 12:06:53 +0000 Oto Machines You’re welcome.
No, there’s no spillover mode for BOUM, spillover is only applicable on delays and reverbs.

]]> https://www.otomachines.com/forums/topic/noise-when-press-active-button/#post-85420 <![CDATA[Reply To: Noise when press active button]]> https://www.otomachines.com/forums/topic/noise-when-press-active-button/#post-85420 Fri, 24 Mar 2023 11:29:13 +0000 Thomas Thank you, that is helpful.

No sound on the speaker without audio signal going through (I do hear a small click coming from the box itself but not from the audio).

I should have mention this is on the BOUM.
I don’t think there is any spillover relay mode on this box, am I correct?

]]> https://www.otomachines.com/forums/topic/noise-when-press-active-button/#post-85419 <![CDATA[Reply To: Noise when press active button]]> https://www.otomachines.com/forums/topic/noise-when-press-active-button/#post-85419 Fri, 24 Mar 2023 10:08:31 +0000 Oto Machines There’s a relay inside our units for true bypass purpose. So the click noise you can hear is normal. If it annoys you, you can use the Spillover relay mode, but you won’t have a true bypass when ACTIVE is off.
If you experienced also a click on your speakers (without signal passing thru), that can be a DC leakage from your mixer, audio interface, source,…Try another setup to identify from where this leakage is coming.
Also the Spillover mode will cancel the pop noise coming from a DC leakage.

]]> https://www.otomachines.com/forums/topic/noise-when-press-active-button/#post-85418 <![CDATA[Noise when press active button]]> https://www.otomachines.com/forums/topic/noise-when-press-active-button/#post-85418 Thu, 23 Mar 2023 17:17:12 +0000 Thomas Hi,

I got a little metallic pop when I press the “ACTIVE” button on my unit.
Is this conciser normal, anyway to avoid it?

Note that I get the same when “ACTIVE” is control via Midi Cc.

Thanks,
Thomas

]]> https://www.otomachines.com/forums/topic/power-supply-2/#post-84938 <![CDATA[Power Supply]]> https://www.otomachines.com/forums/topic/power-supply-2/#post-84938 Tue, 21 Dec 2021 00:26:02 +0000 Hi All,
I just picked up a BIM without power supply. I am wondering if there is a cheaper snail mail option of shipping or an American alternative power supply. Thanks

]]> https://www.otomachines.com/forums/topic/ideas-for-bim-firmware-upgrade/page/2/#post-84897 <![CDATA[Reply To: Ideas for BIM firmware upgrade]]> https://www.otomachines.com/forums/topic/ideas-for-bim-firmware-upgrade/page/2/#post-84897 Fri, 26 Nov 2021 04:07:16 +0000 It would be nice if midi filtering could be applied on a per-patch basis. When using CC messages from Digitakt’s LFO to control BIM’s delay speed for flanging effects and then change to another patch the delay continues to speed up and slow down as midi filtering seems to be a global parameter. Is it possible to change this?

Thanks. :))

]]> https://www.otomachines.com/forums/topic/bim-bam-biscuit-dervoto-m4l-devices/#post-84891 <![CDATA[Reply To: BIM BAM Biscuit DERvOTO M4L devices]]> https://www.otomachines.com/forums/topic/bim-bam-biscuit-dervoto-m4l-devices/#post-84891 Mon, 22 Nov 2021 09:52:55 +0000 Great stuff, thanks!

]]>